Iscar Adds Their Most Recent Innovations To A Extensive Line Of Successful Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These innovative products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with brand new and innovative ways to boost productivity for the customer. Here is a little bit about these cutting edge products, and how they will benefit the end user of these products.
SUMOCHAM Drills
ISCAR's new SUMOCHAM drill family is an advanced development of the very thriving CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for various material groups. SUMOCHAM drills can be used on milling centers or lathes.
SUMOCHAM incorporates four different standard drill head geometries, designed for optimum performance and high dependability. The drill head is constructed with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are available in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, uninterrupted chip flow and a ground gash for improved penetration.
The drill shank design is according to DIN 9766 standard, with available drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies feature coolant through holes. The accurate cylinder added to the clamping portion improves durability and decreases internal stresses. The rotation stopper planes are precisely ground, which improve the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will furnish longer tool life and higher productivity.
DR-DH Deep Drills
DR-DH drills can accomplish drilling depth-to-diameter ratio of 7XD and up. Designed to be implemented on standard horizontal milling centers, turning, and multi-task machines. Use of additional machine and setup can be avoided. They will be obtainable as semi-standard product in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").
Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very rigid tool complete with a patented chip gullet design. It was engineered for easily cut materials like cast iron and low alloyed steel.
A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for enhanced chip flow. It was designed for drilling gummy materials such as non-alloyed steel and high temperature alloys.
ISCAR DEEP HOLE DRILLS
With ISCAR's brand new solid carbide deep hole drills, you can easily drill up to 22 times diameter and attain bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This capability can speed up a great number of high-volume operations. The deep-hole drilling station no longer needs to slow down a transfer line or stop it completely because a drill breaks.
Other target applications include deep holes for automotive, hydraulic blocks and die & mold work. A aggregate of features assist the twist drills to cut faster, straighter,deeper, last longer and evacuate chips more surely. A special high-strength core creates a more enduring drill point and allows for deeper flutes, enlarging the exit path for chips.
The drill tip itself has a 140 positive-point, four-margin design to preserve the edge, diminish thrust forces and aide centering and tracking. A post-coat polishing method on the flutes, margins and cutting edges reduces friction and torque that can easily snap a drill.
The brand new drills are available in standard diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are available on request. All are built of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.
These are just some of the latest innovations coming from Iscar.
Iscar Releases A Completely New Family Of Slitting Cutters Applying Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Iscar Recently Releases Many New Lines To Increase Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
Numerous Advancements Have Multiplied Iscar's Families Of Indexable Endmills For Increased Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
Completely New End Mills From Iscar Can Amplify Productivity While Reducing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Push Pull Testing For Railway Industry With Calibrated Measuring Instruments. Mechanical Load Testing Methods For On Site Evidence To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
The Latest In Carbide Endmill Designs In A Long And Prospering Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Iscar Recently Releases Many New Lines To Increase Their Family Of Milling Tools Some Of Advancements In Carbide Inserts By Iscar Numerous Advancements Have Multiplied Iscar's Families Of Indexable Endmills For Increased Productivity Completely New End Mills From Iscar Can Amplify Productivity While Reducing Costs Cutting Edge Tools And Carbide Insert Compositions From Iscar To Better Enhance The Machining Procedure Some Of Advancements In Carbide Inserts Coming From Iscar Several Advancements Have Expanded Iscar's Families Of Indexable Endmills For Heightened Productivity A Variety Of Advancements Have Multiplied Iscar's Families Of Indexable Endmills For Elevated Productivity The Newest In Carbide Endmill Designs In A Extensive And Effective Line From Iscar The Most Recent In Carbide Endmill Designs In A Extensive And Outstanding Family From Iscar The Newest In Carbide Endmill Configuration In A Extensive And Successful Line From Iscar
Iscar recently released several different drilling innovations to meet their customers needs. These innovative products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with brand new and innovative ways to boost productivity for the customer. Here is a little bit about these cutting edge products, and how they will benefit the end user of these products.
SUMOCHAM Drills
ISCAR's new SUMOCHAM drill family is an advanced development of the very thriving CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for various material groups. SUMOCHAM drills can be used on milling centers or lathes.
SUMOCHAM incorporates four different standard drill head geometries, designed for optimum performance and high dependability. The drill head is constructed with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are available in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, uninterrupted chip flow and a ground gash for improved penetration.
The drill shank design is according to DIN 9766 standard, with available drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies feature coolant through holes. The accurate cylinder added to the clamping portion improves durability and decreases internal stresses. The rotation stopper planes are precisely ground, which improve the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will furnish longer tool life and higher productivity.
DR-DH Deep Drills
DR-DH drills can accomplish drilling depth-to-diameter ratio of 7XD and up. Designed to be implemented on standard horizontal milling centers, turning, and multi-task machines. Use of additional machine and setup can be avoided. They will be obtainable as semi-standard product in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").
Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very rigid tool complete with a patented chip gullet design. It was engineered for easily cut materials like cast iron and low alloyed steel.
A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for enhanced chip flow. It was designed for drilling gummy materials such as non-alloyed steel and high temperature alloys.
ISCAR DEEP HOLE DRILLS
With ISCAR's brand new solid carbide deep hole drills, you can easily drill up to 22 times diameter and attain bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This capability can speed up a great number of high-volume operations. The deep-hole drilling station no longer needs to slow down a transfer line or stop it completely because a drill breaks.
Other target applications include deep holes for automotive, hydraulic blocks and die & mold work. A aggregate of features assist the twist drills to cut faster, straighter,deeper, last longer and evacuate chips more surely. A special high-strength core creates a more enduring drill point and allows for deeper flutes, enlarging the exit path for chips.
The drill tip itself has a 140 positive-point, four-margin design to preserve the edge, diminish thrust forces and aide centering and tracking. A post-coat polishing method on the flutes, margins and cutting edges reduces friction and torque that can easily snap a drill.
The brand new drills are available in standard diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are available on request. All are built of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.
These are just some of the latest innovations coming from Iscar.
Iscar Releases A Completely New Family Of Slitting Cutters Applying Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Iscar Recently Releases Many New Lines To Increase Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
Numerous Advancements Have Multiplied Iscar's Families Of Indexable Endmills For Increased Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
Completely New End Mills From Iscar Can Amplify Productivity While Reducing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Push Pull Testing For Railway Industry With Calibrated Measuring Instruments. Mechanical Load Testing Methods For On Site Evidence To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
The Latest In Carbide Endmill Designs In A Long And Prospering Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
